STMicroelectronics STEVAL-SILKT01 Evaluation Kit
STMicroelectronics STEVAL-SILKT01 Evaluation Kit is designed for industrial PLC solutions that target SIL3 applications. This kit includes one motherboard STEVAL-SILKTA01 (main board) and two daughter boards STEVAL-SILKTB01 (actuation board). The main board consists of three connectivity interfaces. Two of the interfaces come with differential communication working on RS485 and CAN physical layer, and the third interface with Ethernet technology to support the Ethernet/IP. The STEVAL-SILKT01 evaluation kit features dual digital outputs (IPS1025H and IPS4260L), dual digital inputs (CLT03-1SC3), and >90% full diagnostic coverage. This evaluation kit is suitable for Programmable Logic Controllers (PLCs).
Features
- Designed to meet IEC61508-2, EN 62061, EN ISO 13849-1, and EN ISO 13849-2 for a SIL3/PLe achievement
- Dual-core architecture based on STM32H743ZG and STM32G431RB
- Dual digital outputs IPS1025H and IPS4260L
- Dual digital inputs CLT03-1SC3
- >90% full diagnostic coverage
- Galvanic isolation for data transmission and digital I/O signals using STISO621
- Overload and overtemperature protections and integrated onboard at the device level
- Redundancy on board, at hardware level, and data processing
- Real-time communication supporting Ethernet technology for Ethernet/IP, and differential serial communication for RS485 and CAN
Applications
- Programmable Logic Controllers (PLCs)
Kit Contents
- 1 motherboard STEVAL-SILKTA01 (main board)
- 2 daughter boards STEVAL-SILKTB01 (actuation board)
Related Products
STMicroelectronics STM32H7 High-Performance MCUs
Based on the high-performance Arm Cortex-M7 32-bit RISC core operating at up to 480MHz.
STMicroelectronics Microcontroladores (MCU) de señal mixta STM32G4
Combinan un núcleo Arm® Cortex®-M4 de 32 bits (con instrucciones FPU y DSP) que se ejecuta a 170 MHz.
STMicroelectronics CLT03 Series Digital Input Current Limiters
Does not require an external power supply and is powered through inputs.
STMicroelectronics IPS1025H, IPS1025H-32, & IPS1025HF Switch ICs
Drive capacitive, resistive, or inductive loads with one side connected to the ground.
STMicroelectronics IPS4260L Quad Low-Side Intelligent Power Switch
Monolithic, high-speed power switch designed to drive up to four independent protected channels.
Complete Your Design
STMicroelectronics Standard Products
A broad range of drop-in replacements for general-purpose analog ICs, discretes, and serial EEPROMs.