MAX22205 High Current Single H-Bridge

Analog Devices MAX22205 High Current Single H-Bridge has a high current 65V, 7.6AMAX H-Bridge to drive one brushed DC motor or one half stepper motor. The H-Bridge FETs feature very low impedance, resulting in high driving efficiency and low heat. The typical total RON (high-side + low-side) is 0.15Ω. The Analog Devices H-Bridge can be PWM controlled by two logic inputs (DINA, DINB). A third Enable (EN) logic input can be used to configure the outputs to high impedance for coasting the motor.

Resultados: 4
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (ARS) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS Modelo ECAD Producto Tipo Corriente de salida Corriente de suministro operativa Temperatura de trabajo mínima Temperatura de trabajo máxima Estilo de montaje Paquete / Cubierta Empaquetado
Analog Devices / Maxim Integrated Motor / Movimiento /Controladores y dispositivos de ignición DUAL H-Bridge for Stepper and Brushed DC 2.041En existencias
Min.: 1
Mult.: 1
Carrete: 2.500

Half-Bridge Drivers 7.6 A - 40 C + 125 C SMD/SMT TSSOP-38 Reel, Cut Tape, MouseReel
Analog Devices / Maxim Integrated Motor / Movimiento /Controladores y dispositivos de ignición single H-bridge 36En existencias
Min.: 1
Mult.: 1

Half-Bridge Drivers 7.6 A - 40 C + 125 C SMD/SMT TSSOP-38 Tube

Analog Devices / Maxim Integrated Motor / Movimiento /Controladores y dispositivos de ignición DUAL H-Bridge for Stepper and Brushed DC
2.548En pedido
Min.: 1
Mult.: 1

Brushed DC Motor Drivers Half Bridge 7.6 A 5 mA - 40 C + 125 C SMD/SMT Tray
Analog Devices / Maxim Integrated MAX22205ATU+T
Analog Devices / Maxim Integrated Motor / Movimiento /Controladores y dispositivos de ignición DUAL H-Bridge for Stepper and Brushed DC Plazo de entrega no en existencias 10 Semanas
Min.: 1
Mult.: 1
Carrete: 2.500

Reel, Cut Tape, MouseReel